Reproduction BAYKO Rods - Cut-to-Order

If you arrived here by mistake looking for more information about BAYKO Rods then please click on one of the two links below for more information : -
.
Rods aren't particularly sexy BAYKO parts, but they're essential...
...and sometimes you just can't get hold of a Rod that is long enough for a particular model.
During BAYKO's life time, both Plimpton and MECCANO offered a "made-to-measure" service - well "Cut-to-Order" anyway.
After a mere forty four year gap, I am now offering a "cut-to-length" service to fellow BAYKO modellers.
.
I have now identified a source of correct gauge [1.905 mm - the original 75 thou] replica Rods and the "Cut-to-Order" Rods I am offering are cut from these.
The price structure is simple and is laid out in the table below. Please note, you can ask for lengths in terms of Bricks, inches or millimetres - if doing your own calculation, don't forget to add 3/8 inch [10mm] to allow for the bit that goes into the base and the bit that sticks out at the top!
.
If you are planning to use particularly long Rods, supported, at regular intervals, by Floors - don't forget to ask for an extra allowance to accommodate these! If you want rods of an unusual length, please use the length in inches or millimetres as your guide, cost will be based on the size bands below : -
.
Cut-to-Order Reproduction BAYKO Rods Price List
Length in Bricks
Length in Inches
Length in Millimetres
Price Each
7-Brick
5.625
143
50p
8-Brick
6.375
162
54p
9-Brick
7.125
181
57p
10-Brick
7.875
200
60p
11-Brick
8.925
219
64p
12-Brick
9.375
238
69p
13 to 14-Brick
up to 10.875
up to 276
75p
15 to 17-Brick
up to 13.125
up to 333
83p
18 to 20-Brick
up to 15.375
up to 391
95p
21 to 26-Brick
up to 19.875
up to 505
£1.13
27 to 35-Brick
up to 26.625
up to 676
£1.42
36 to 52-Brick
up to 39.375
up to 1,000
£2.00
53 to 104-Brick
up to 78.375
up to 2,000
£3.75
.
Postage, packing and insurance is entirely dependant on the number and length of the Rods that you order.
Please email me with details of your requirements, together with your address, and I will let you know the postage charges...
You can pay in two ways : -
 
By PayPal using my registered email address which is : -
   
pete@baykoman.com
 
By cheque, in which case please expect a brief delay before despatch while I wait for the cheque to clear.
.
If you are uncertain about anything, please email me beforehand...
...I can't uncut rods I'm afraid!!!
.
Below here are links to related info : -
.
Click on any of the links below for related information.
 
.
 
 
The 'Flaming BAYKOMAN' site logo
 
 
.
 
   
 
.